Fast Growing Grape Vines

By | January 20, 2017

The 2 year grape journey is a sweet and interesting journey of planting Thompson seedless grapes all the way to harvest so sit back and enjoy as we go through grape paradise so we started our grapes back in january.

Of 2015 this is the flame seedless grape we got this at home people and you can get these grape plants at any gardening center in your area and the first thing you need to do is.

Once you get the package you just open it and you want to make sure that the roots stay hydrated while you’re preparing your potting mix or while you are planning to plant this in the ground as you can see here this is a bare.

Rooted plant and you just keep it in water just make sure the roots stay hydrated while you prepare your potting mix we will be planting this in a container you can plant it in the ground as well.

And here we go it’s just a simple container with water and now we’re going to prepare our potting mix we’re going to be using a large pot grape trees grow into very large plants and need a lot of space for the roots so we’re gonna be.

Using this container, it has a lot of holes drilled as you can see a common question that a lot of users ask me is if you need holes in containers when growing plants and the answer is yes you do we’re going to be using a mix of peat.

Moss onethird of peat moss i’m just using this compressed bale of peat moss that you can get at any garden store make sure that you break up the pieces very well and to this mix we’re going to be adding onethird of compost now i’m.

Using some homemade compost here you can buy bagged compost if you want and some of my compost is unfinished so I’m going to be removing some of the unfinished compost from this mix and make sure that i have a lot of finished.

Growing Grapes

We have plenty of wild concord grapes on our property. however, the insurance company doesn’t approve of our harvesting methods so it’s probably best to plant some cultivated grapes. When I cleared the land for the greenhouse, it left plenty of area to plant various fruit producing plants which don’t need the greenhouse to thrive. Plus why waste the space just growing grass? Taking a look at my 3rd grade drawing skills, I’m going to set three 4x4x10′ treated posts.

34 feet into the ground and space them 24′ apart. this will allow for 8 plants in the space. Then I’ll string 12 gauge galvanized wire starting with the first wire 4246 from the ground, then space the other two 12 apart. The plants can be spaced 6′ apart and over time the vines can be trained along the 3 wires. I had planned to set the posts first in the event that I hit any large rocks while digging, however I blew a seal on the backhoe and had to find some parts for it. So I took my chances.

And put the plants in first. the row should go in a straight line and a 100′ tape measure works well for marking out the locations of each post and plant. Jamming a piece of survey’s tape at each mark does the trick. We’re going oldschool and using a pickaxe and shovel and digging a hole about 1 foot deep. Luckily there weren’t any large rocks in the way just a few roots and small stones that the pickaxe was able to pluck out. Later, looking at the post holes, you’ll see why I didn’t dig them by hand.

Planting the vines is fairly easy. i got these seedless concord grapes from gurney’s for half price. I just remove the fiber that’s used for keeping the roots damp, spread out the roots a bit, and set it in the hole so that all the roots that emerge from the vine will be just below the finished level of the soil. All the dirt that came out of the hole was hardpan so I filled it with nice organic soil, then compacted it down, and gave it a really good watering. It also important to cover the area with mulch to help maintain.

The moisture in the soil until the roots can get established. these will get watered every day for a couple of weeks. The actual work of planting the vines is quick. It’s the preparation of digging out the rocks that takes all the time. A 30 cent Oring and a day to dismantle and reassemble the valve assembly and the backhoe is running again. I can now install the posts for the wire arbor. It may not be the fastest.

Backhoe, but it beats digging through the rock with a pick and shovel. the holes are dug to about 4 feet which will provide a deep enough anchor to prevent the posts from leaning from the future weight of the vines. Some of the rocks that I pulled out where bigger than the hole. If I had to dig these by hand, I probably would have only dug down a couple of feet, and then would have to anchor the posts with concrete and guywires. It seems like a really big hole for a post, but without an auger with rock drilling bit,.

It’s probably the easiest way to set a post. a little cleanup at the bottom of the hole and it’s ready. I’m using 4×4 treated lumber rated for direct burial. I’m not a fan of using treated lumber, but in order for it to last a long time, it’s a necessary evil. I like to add two temporary cleats to the post to help support it while I’m set it plumb and backfill the hole. I also like to drop a few rocks around the base to hold it in place when I start to fill it in. I’ll fill the hole several inches at a time and compact.

It between each layer, then clean up the area with some more woodchip mulch. The first wire starts roughly 4246 inches from the ground and the second and 3 wires are spaced 12 inches apart. It will be the perfect snacking height for the deer. At each marking I’ll drill a 3/8 hole through the post and then put in a 5/16 eyebolt. The back side has a large fender washer and nut. Having a large washer will help to keep the nut from pulling into the post under the weight of the vines. It’s fairly important to make.

Leave a Reply